If the power goes: induction hobs, appliances and what a kitchen refit should allow for
A House of Lords report on UK resilience was published on 16 November, and a power-cut rumour has been firmly denied. Here is what a kitchen or bathroom refit should plan for when the power goes.
On 16 November, a House of Lords committee published a report on the UK’s resilience to emergencies. Its conclusion is that the country is seriously underprepared for emergencies and the threats it faces, and it calls for urgent action from government. The report covered wider issues, including cascading failures and cyber attacks, and it is the real news of the week.
Alongside the report, a rumour spread on social media that the power would be cut across the country on 19 November. National Grid has said publicly that the rumour is not true. Nothing about it should change how a home is planned. What the report does do is put a simple question in front of anyone who is about to rip out a kitchen: when the electricity is off, what still works, and what did the design assume?
This article looks at that question for a kitchen or bathroom refit. It is not about stockpiling, and it does not assume anything will go wrong. It is about making sure the room you are building works sensibly in every situation, including the rare one where the supply drops for a while.
Why the choice of hob matters
Cooking is where a refit meets the electricity supply most directly. An induction hob runs entirely on electricity, and it does not work without a supply. A gas hob can often be lit with a match when the electric ignition is not working, which is one reason some households keep a gas hob even when the rest of the kitchen is electric.
That is not a reason to choose one fuel over the other. Induction cooks quickly and precisely, it is easy to clean, and it suits many kitchens very well. The point is simply to decide, before the work starts, what the household will do if the hob is dead: which pans, which kettle, what the backup is, and whether the family would notice the difference at breakfast.
Which appliances depend on the supply
In a modern kitchen, a lot more depends on electricity than people tend to think. The obvious ones are the hob, the oven, the extractor, the fridge and freezer, the dishwasher and the washing machine. Less obvious are the boiler controls, the pump in a heating system, any electric shower in a nearby bathroom and the heated towel rail.
Make a list of every appliance in the room and the rest of the house that depends on power, and mark each one as essential, useful or nice to have. That list is the basis for the refit design. It tells you where the extra sockets are needed, which circuits should be separate, and where a plug-in point should be placed so that a generator or a portable supply can be connected safely if the household has one.
What a refit should allow for
A good refit allows for the appliances you plan to buy today and the ones you may buy in ten years. Ask the electrician to check the consumer unit and the circuits before the design is fixed. A new hob, an oven and a dishwasher can add up to a significant load, and it is much cheaper to plan the circuits now than to open the walls again later.
Other practical points belong in the design too. Sockets should be placed where appliances will actually be used, not just where the plan has space. Worktop and appliance heights should suit the people who will use them every day. Where possible, keep the fridge, the freezer and the main cooking appliance on circuits that are clearly labelled, so anyone working on the house knows what is affected when a breaker trips.
Ventilation matters as well. An extractor that depends on power will not clear the air during a cut, so think about natural ventilation for a room that will be used for cooking.
Bathrooms, heating and water
A bathroom refit has its own power questions. An electric shower needs a dedicated supply and a clear route for the cable, and it will not work without power. A heated towel rail and any underfloor heating also depend on electricity. If a heat pump is on the list for the future, ask the installer to note where the cables and pipes run, so the heating layout can be planned without tearing the new room apart.
Water supply is worth checking in the same conversation. Ask how the water supply is isolated and restored during the work, and where the stop valve is. Keep the design simple enough that anyone in the household can find the important controls without a torch and a manual.
Planning a refit that copes with the unexpected
The aim of a resilient kitchen is not to prepare for a crisis. It is to make the room work well on an ordinary day and to keep a few sensible options open when something goes wrong. Good planning covers the basic power needs, the circuit layout, the ventilation, and the knowledge of how to switch things off and on safely.
Put these questions to your designer and fitter, and ask for the answers in writing:
- Which appliances depend on electricity, and what circuits are they on?
- Is the consumer unit suitable for the planned load, and has an electrician checked it?
- Where will the sockets be, and is there a safe place for a portable supply?
- How will the room be ventilated when the extractor is not running?
- How are the water and heating controls labelled, and who will explain them at handover?
Talk to us about your refit
If you are planning a kitchen or bathroom refit in Exmouth or the surrounding area, our team can talk through the appliance choices, the layout and the electrical planning before anything is ordered. We use top quality appliances and fittings, we choose them with you, and our in-house fitters, plumbers, plasterers and tilers work from one plan. Read more about our kitchen appliances and the kitchen design service , or get in touch to arrange a visit. For more on planning a refit through the colder months, see our earlier article on winter kitchen and bathroom refits .
Not sure what you need?
Whether you are looking for a kitchen, bathroom or bedroom solution, we can help advise you on the best solution for your property.